Stovax Stoves

Stovax have been dedicated to making wood burning stoves for nearly 30 years. We have stove models and colours to suit all interiors. Our wood burning and multi fuel stoves use the latest combustion technologies to produce maximum heat output from the fuel, make the fires quick to start, easy to maintain and even keep the glass cleaner for longer.


Woodburning and Solid Fuel

All Stovax stoves are designed either for multi-fuel use, which means they burn logs, smokeless fuels or peat/turf briquettes, or as wood burners only.

Multi-fuel stoves have a riddling grate which allows ash to be riddled into a built-in ash pan to create the optimum conditions for efficient combustion. Wood burners have a fixed grate and no ash pan, since wood burns best on a bed of ashes.

Hot Water, Radiators and Underfloor Heating

Several Stovax wood burning/multi-fuel stoves are designed to be fitted with optional boiler systems and details of these can be found on the online brochure. Additionally, Stovax offer a selection of High-output Boiler models that come with the boiler built in.

If you choose a stove with an integral High-output Boiler, you can not only supply yourself with domestic hot water but even run your radiators all from the same appliance.

Alternatively, you can ‘link up’ a Stovax boiler stove with your conventional oil or gas fuelled central heating system. This link up system will not only reduce reliance on your heating being provided from a single fuel source but, if burning wood, will also make your heating better for our environment through lower carbon emissions.

‘Link up’ can also connect with gas or oil, sealed heating systems, combi’s, underfloor heating, advanced electronic controls and solar panels to make even more flexible systems.

For more details, see our link up technology guide at www.stovax.com/linkup.

Airtight Construction

All Stovax stove doors, except the Regency, have airtight seals which permit airflows to be precisely controlled. This allows both the heat output and refuelling frequency to be varied and helps maximise burning efficiency.

Perfect Flame Control

The triple air system in certain stoves also allows complete control of the flame picture. From a deep glow, with minimal flames, it takes only a few seconds to fill the firebox with swirling flames from the fuel and jets of flame from the Cleanburn ports.

Enamel Stoves

Enamel is a very thin coating of coloured glass which is fired at over 800°C on to a metal surface. To achieve its translucent and lustrous finish, each casting is especially designed for enamelling and is coated and fired twice. Enamel is an option on many stoves, and available in up to three colours.


Brunel 1A Stove

Ideal for smaller rooms, the Brunel 1A is the smallest stove in the Stovax cast iron stove range. It is designed to fit into a standard 22" high British fireplace.The Brunel 1A stove features Airwash to help keep the glass window clear, it has full multi fuel & wood burning capability and an externally operated riddling grate. There is even an option to fit a boiler to supply domestic hot water.

Colour choices: Matt Black, Midnight Blue Enamel, Laurel Green Enamel, Ivory Enamel.

Maximum heat output    4kW (2kW with boiler)


Brunel 3CB Stove

The largest stove in the Brunel range, the 3CB, has a large glass window giving an excellent view of the swirling flames of the Stovax Cleanburn system.This stove incorporates all of Stovax's state-of-the-art technical features such as the stainless steel heat exchanger. The stainless steel warms up more quickly than traditional cast iron, so begins heating the room faster.

With full multi-fuel & wood burning capability and external riddling, the Brunel 3CB generates up to 7kW of heat for you to enjoy.

Colour choices: Matt Black, Midnight Blue Enamel, Laurel Green Enamel.

Maximum heat output    7kW


Huntingdon 28 Stove

The Huntingdon 28 stove is an elegant piece of furniture in its own right. It has Gothic door mouldings and is complemented by reeded side panels.When lit, the latest advances in stove technology allow you to enjoy the flames to the full. You can also precisely adjust the flame picture via dual air controls.

Colour choices: Matt Black, Midnight Blue Enamel, Laurel Green Enamel, Ivory Enamel.

Maximum heat output    6kW


Huntingdon 35 Stove

The Huntingdon 35 stove is available in individual multi fuel and wood burning versions. The clean, graceful lines of this classic stove design look attractive even when it is not alight.

The wood burning version of the Huntingdon 35 has a solid cast iron base, as wood burns more efficiently on a bed of ash, and no ash pan.The multi fuel version incorporates external riddling, a grate and ash pan as well as dual air controls for accurate regulation of the flames and combustion.

Colour choices: Matt Black, Midnight Blue Enamel, Laurel Green Enamel, Ivory Enamel.

Maximum heat output    7.5kW


Stockton 5 Midline Stove

As an alternative to the standard Stockton 5 stove, the Midline version offers a more integrated, contemporary slant. This is particularly suited to modern interiors, yet still provides all the benefits of the original model.

The Stockton 5 Midline stove is suitable for burning wood and multi-fuel. It is also approved for use in Smoke Control areas.

Colour choices: Matt Black, Metallic Blue, Metallic Brown, Metallic Green.

Maximum heat output    4.9kW


Stockton 8 Inset Convector

Not only will this convector fireplace provide impressive heating capacity compared to a standard open fireplace but it also offers you most of the benefits of our freestanding Stockton 8 Stoves.

The Stockton 8 Inset is highly practical too. It has full multi-fuel capability with external riddling, double doors for easy loading/stoking and both Cleanburn and convection systems for greater heating efficiency, whilst the highly effective airwash facility helps ensure you enjoy a clearer view of the fire.

Maximum heat output 8kW


View 3 Stove

The View 3 is the smallest of the View stove range and is recommended for burning multi fuels only.

This stove is approved for use in smoke control areas. It has a cast iron door and large glass window to enjoy the burning flames. There is an optional extra of a glass top plate for a more contemporary look, and the plinth has a glass front as standard.Wood can be burned on this stove, but will not burn as efficiently as other models, such as the larger View 5 stove, which are available as wood burning versions.

Maximum heat output    3.75kW


View 7 Inset Convector

The contemporary View stoves range has been expanded to include an inset convector fireplace offering many of the heating advantages of a freestanding stove. Incorporating Stovax’s exceptional Cleanburn and convection systems, the Multi-fuel View 7 Inset Convector provides up to 4 times more heating efficiency than a standard open fire; giving greater combustion control, increased heat outputs and lower fuel costs. An integral boiler version is also available, producing up to 30,000 BTUs of hot water.

Maximum heat output 7kW

This is only a selection to illustrate the range of wood burning and multi fuel stoves that Stovax manufacture. To see the complete catalogue online, please click here

Stovax Riva Cassettes Range


Riva 40 Multi Fuel Fire

Giving you more heat for your money.

The smallest model in the Riva range is designed to fit a standard, 22" (560mm) high x 16" (405mm) wide, British fireplace opening with the chair brick removed. So you can update the look of your living room with minimal construction work and, possibly without the need to remove the existing hearth and mantel. Alternatively the Riva 40 fire can be installed as a 'hole in the wall' fire.

In addition to providing contemporary style, a Riva 40 fire significantly increases the level of heat in your room compared to a conventional open fire. Combustion efficiency is up to 4 times greater; giving you more heat for your money and lower fuel costs.

Colour choices: Storm Metallic or Midnight Black Metallic paint.

Heat output    1.5 – 4.9kW


Riva 55 Multi Fuel Fire

Enhance your heating options.

With greater heat output and a large window to view the flames, the Riva 55 cassette fire can be installed into a standard British fireplace opening which is 915mm h x 915mm w x 460mm d (36"h x 36"w x 18"d). It can also be installed as a ‘built in to the wall’ fire. Both options are available with a choice of standard or wide frames.

The Riva 55 offers you two accessories to enhance your heating options:

• The first is fan-assisted convection for quicker warming of the room when the Riva is first lit.
  
  
• The second is a ducting system that can distribute warm air into the same room or to other living spaces.

Installing the fan and ducting system together will maximise the benefits from this impressive 8kW cassette fire.

Colour choices: Storm Metallic or Midnight Black Metallic paint.

Heat Output    2.1 – 8.0kW


Riva 66 Avanti Multi Fuel Fire

A magnificent, landscape-shaped cassette fire.

Sharing exactly the same firebox features as the standard Riva 66, the Avanti differs only by its more contemporary styling - offering a design in its own right. Above and below the door are finely proportioned Midnight Black steel panels whilst the door itself is gently curved and finished in Storm metallic paint.

The door handle locates on the right and may be removed after refuelling. The controls are discreetly positioned under the door so all you see are the crisp, clean lines of the Avanti surrounding a swirling picture of flame.

If you expect to burn mainly smokeless fuel, then due to the larger firebox, you may wish to consider the optional 'reducing' kit. This decreases the amount of fuel you need to load but it also guides the fuel and cinders towards the grate for improved combustion. However, you may still burn wood with equal efficiency.

Furthermore, you can optimise the heating potential of the Riva 66 Avanti fire with two accessories:

• The first is a fan-assisted convection kit, which boosts warm air entering the room at just the flick of a switch.
  
  
• The second is a ducting system that diffuses some of the heat to other points in the same room or into other living spaces.

Or install both the fan and ducting system for ultimate heat distribution.

Colour: Storm Metallic/Midnight Black Metallic.

Heat output    2.4kW – 8.0kW

To see the full range of Stovax Riva Cassettes and Stoves in their online brochure please click here



Riva Studio Cassette Fires


Riva Studio Ceramica Wave Wood Burning Fire

A stunning frame design.

Riva Studios have been created for contemporary living. Boasting superb heating efficiency and innovative design features – they offer functionality and visual appeal.

The Riva Studio Ceramica Wave has a wide frame with a wave pattern and is available in two sizes: Studio 1 and 2. The smaller Studio 1 fire offers up to 5kW heat output whilst the larger, Studio 2 will produce up to 8kW heat for larger rooms. Heat can also be transferred to other rooms by fitting the optional ducting system.

Riva Studio Ceramica Wave offers high efficiency wood burning, with 75% heating efficiency.

Available with optional kit for use in smoke control areas.

Riva Studio Ceramica Wave colour choice: Graphite, Oyster White or Graphite and Oyster White


Riva Studio Glass Wood Burning Fire

A panoramic spectacle of glowing logs.

Riva Studios have been created for contemporary living. Boasting superb heating efficiency and innovative design features – they offer functionality and visual appeal.

The Riva Studio Black Glass has a striking black glass frame. Like other Riva Studio fires it is available in three sizes: Studio 1, 2 and 3. The smaller Studio 1 fire offers up to 5kW heat output while the largest, Studio 3, will produce up to 11kW heat for larger rooms. Heat can also be transferred to other rooms by fitting the optional ducting system.

Studio 1 and 2 sizes available with optional kit for use in smoke control areas.

All Riva Studios are high efficiency wood burning fires, with a 75% heating efficiency.


Riva Studio Verve Wood Burning Fire

A statement frame to create a designer look.

The new Verve has been designed to add a curved 3D frame to the Riva Studio fire range. A statement frame to create a designer look, the Verve is finished in Midnight Black Metallic and available in all three Riva Studio sizes, enabling you to pick the exact fire you need to create a truly bespoke look.

Like other Riva Studio fires it is available in three sizes: Studio 1, 2 and 3. The smaller Studio 1 fire offers up to 5kW heat output while the largest, Studio 3, will produce up to 11kW heat for larger rooms. Heat can also be transferred to other rooms by fitting the optional ducting system.

The Riva Studio Verve is a high efficiency wood burning fire, with 75% heating efficiency.
Studio 1 and 2 sizes available with optional kit for use in smoke control areas.


To see the full range of Stovax Riva Studio products in their online brochure please click here